site search by freefind advanced

 

View Basket    Products  Customer Reviews   About Us   Price Lists  How to Buy and Terms   Contact Us

 

When you buy from Roalan you will be treated well, you will get a high-quality product which will not cost you a fortune. And you will get more satisfaction out of your purchase than you expected.

Quad Honestrum.

Join our Many satisfied customers all over the world.

You don't have to buy online. Just call us on +44 (0)1202 861512 to discuss your application.
email

Available Products:

PCI Parallel

PCI-X Parallel

PCI Express

 Parallel

PCI Serial

PCI-X Serial


PCI Express Serial

USB to Industrial Serial RS232/422 Converters

Ethernet to Serial Servers

WLAN to Serial Servers

ModBus Network Gateways

ExpressCard to Seria, Firewire, LAN and Serial

ExpressCard to PCMCIA CardBus

Embedded CPU ARM Modules

GSM Phone Switch

USB to GSM 3G Modem

Multi-Modems

Bluetooth to Serial

PCIe Expansion Box

PCI Gigabit Cards

PCMCIA Card Readers

PCI Express Card Reader

PCI Firewire Cards

Serial to CAN Adapter

USB to CAN Adapter

Network to CAN adapter

PCMCIA Serial and Parallel Cards

PCMCIA Synchronous Serial Cards

GPRS Cellular Serial Modem

 

 

 

 

 

 

 

Modbus Gateways

ModGate 113ModGate 413ModGate 813

 

Modbus Gateways connect a network with serial Modbus lines. They convert Modbus/TCP on the network to Modbus/RTU or Modbus/ASCII on the serial connection. The serial line may operate by RS232 for a single device, or in RS485 mode to connect with many devices.
This platform with ARM9 RISC-Processor provides Ethernet or WLAN connection plus up to eight serial ports with high speed UART 16C950 (128 Byte FIFO).

Modgate  is an industrial-strength Modbus-Network gateway for connecting one Modbus line to a network running TCP/IP. It operates without platform and distance limitation.
ModGate  uses Modbus/TCP for communication on the network. The serial port is configured for Modbus/ASCII or Modbus/RTU, while the serial line is physically set for RS232 or RS485. The messages received on the network are sent to the serial line, messages from the serial port are sent via network.
The configuration of ModGate is done via HTTP. The user interface is based on Web 2.0 to provide an easy handling of the options. Besides typical serial parameters the configuration includes RS232/485 for serial physical parameters. Further a Modbus address mapping table is available, defining a target port for a certain Modbus address.
ModGate devices are available with up to 8 serial ports, optional also with WLAN plus Ethernet.

Controls up to 8  Modbus lines located virtually anywhere via Ethernet or Internet
LAN interface 10BaseT/100BaseTx Ethernet
Configuration over WEB Browser
Supports TCP/IP, DHCP, ICMP, HTTP, DNS
Supports ART (Automatic Receive Transmit control)
RS232/485 interface selectable by Software

ModGate 113  1 port RS232/485 by Modbus for LAN
£

 

ModGate 413 4 ports RS232/485 by Modbus for LAN
£

 

ModGate 813RM 8 ports RS232/485 by Modbus for LAN, Rackmount
£

 

DK-35A DIN-Rail Mounting Kit £

 



  Hardward

Processor

ARM 9 166 MHz

 

I/O controller

16C950 or compatible

Memory

16MB SDRAM, 2 MB Flash

 

Connector type

DSUB 9 male for serial Port
RJ45 for Ethernet

>Back to top      

  Interface

Ethernet interface

Auto-detecting 10BaseT/100BaseTx

 

Protocols

TCP/IP, DHCP, ICMP, HTTP, DNS

Serial interface

RS232/485 selected by software

 

No. of port

4, Speed up to 115200 bps

Available Modes

RS232 full duplex
RS485 2-wire, half duplex, without echo

 

Signals

RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
RS485: 2 wire Data+/-, GND

RS485 Data control

Controlled by ART (Automatic Receive Transmit control)

>Back to top      

  Performance

Speed

Up to 115200 bps

 

Parity

None, even, odd

Data bits

7, 8

 

Stop bits

1, 2

IRQ

None

 

I/O address

None

>Back to top      

  Operating Modes

Modbus RTU/ASCII

Modbus RTU or Modbus ASCII protocol selected for each serial port individually

 

DirectMappingMode

Direct mapping of Modbus addresses to serial ports or TCP connections

PromiscousMode

Mapping of serial ports to TCP connections

>Back to top      

  Power and Environment

Power requirements

9 - 30V DC, 500mA @ 12V

 

Power supply Adapter

12V DC, 1A. Connected by Terminal block

Dimension

167× 99×29 mm³ (W×L×H)
189×102×30 mm³ with DB9 connector and DIN rail mounting kit

 

Operating Temp

0°C - 55°C

Storage Temp

−20°C – 85°C

 

Case

SECC sheet metal (1mm)

Weight

0.4kg

>Back to top      

  Special Features

Installation

Dip switches set a defined temporary IP Address to contact via WEB Browser

 

Operating mode

 

Promiscuous Mode
Messages received from the network are sent to the serial port, messages from the serial port are sent to the connected network host.
Mapped Mode
Received messages are scanned for their target address. This address is found in a table, the message is sent to the defined connection (serial or TCP).

 

Configuration

Configuration over WEB Browser

 

ART

Automatic Receive Transmit control for RS485

DNS

Domain Name Server support

 

Serial Interface

Serial Interface configurable by software

Firmware

Firmware update over WEB Browser

 

LEDs

LEDs for Power, serial Tx, Rx, Ethernet Link, Speed

>Back to top      

  Security

Password access

Webinterface is password protected. The password can be changed in the Webinterface.

>Back to top      
 
     
 
 
Roalan delivers products worldwide.
VAT will be added to all UK and EU (without a VAT number) deliveries

home

                    Tel +44 (0) 1202 861512

                    Fax +44 (0) 1202 891454

                    Gleneagles House, 31 Riverside Road, West Moors, BH22 0LG, England, UK

                    Registered in England  4591605   VAT GB 474 4377 22     Member 1408917