DIN Rail WiFi – RS232/RS485 Serial Communication Bridge

MDB-W is a WiFi – RS232 / RS485 serial converter that allows serial devices to communicate with IP devices transparently via WiFi network.

  • TRANSPARENT COMMUNICATION
  • GALVANIC ISOLATION
  • CONFIGURATION THROUGH APP
  • PROTOCOL CONVERTER

It has been designed and produced for industrial environments; it is robust with an extended temperature range

MDB-W

Serial RS232 / RS485 – WiFi converter

MDB-W is a bidirectional converter between the WiFi communication channel and the RS232 and RS485 serial channels.
This Serial – WiFi communication bridge therefore allows all devices equipped with a serial port to communicate with software or cards based on IP communication which share a LAN network with WiFi. It is easily programmable thanks to a dedicated APP and the WiFi / Bluetooth interface. It does not require any additional software for configuration. A dedicated APP allows you to read, modify and set all device parameters.
The galvanic isolation of the serial ports ensures protection for all connected instruments and it is a guarantee of isolation from the rest of the system.

.

GENERAL FEATURES

  • Ethernet 10/100 MB/s
  • RS485 optoisolated port (1200-115200bp)
  • DIN rail support(1 module)
  • Front signaling LEDs
  • Size: 17,5 x 86 x 58 mm (1 module DIN)
  • CE certification (Standard EN 61000-6-2,
    EN 61000-6-4)

ELECTRICAL FEATURES

  • Power supply 9-32VDC
  • Average absorption <: 1,5W
  • Operating temperature: -20°C ÷ +60°C
  • Storage temperature: -40°C ÷ +80°C
  • Relative humidity: from 0 to 80% without condensation